Designed and manufactured in South Africa, the TKC range of chillers are designed for computer rooms and other special room enviromental control. These chillers are designed for high ambient conditions. Standard capacities are from 15.8 kW to 52 kW. The frame and panels are manufactured from Aluminium.
Semi-hermetic compressors.
Shell and tube condensers.
Shell and tube evaporators.
Oil pressure switch.
All units are assembled, internally wired and charged with refrigerant R407C at the factory.
Voltage monitor.
Head pressure control.
Refrigerate - R407C
Units are self-contained and compact for easy installations.
Test run before delivery.
Units are designed to be ridged and Strong.
Designed and manufactured in South Africa, the TAH Air Handling units from Compact Cool, are designed for very high ambient temperatures, suitable for indoor and outdoor applications with units that include aluminium profile frames, and covers that are insulated.
Reciprocating compressors.
Axial impeller pans.
Fiberglass tank.
Evaporator plate heat exchanger.
All that is required on site are water pipe connections, wiring to the mains power supply and interlocks for the evaporator and condenser pump.
Heating.
Suction and discharge gauge.
Condenser with copper fins.
Single phase and low voltage protection.
Textured electrostatic powder coating finish.
Test run before delivery.
Large water tank to reduce stop/starts of chillers.
Units are self-contained and compact for easy installations.
Designed and manufactured in South Africa, the Compact Cool Clip-on A/C package unit is suitable for high ambient conditions. The frame is made of Aluminium profile and the condenser unit can be removed to install remotely for different applications. One of the features of this unit is the low condensing pressure which enables it to perform in extreme ambient temperatures. Standard capacities are from 9kw to 12 kw.
Reciprocating compressor.
Axial condenser fan.
Centrifugal evaporator fan.
Heater bank.
All that is required on site are water pipe connections, wiring to the mains power supply and interlocks for the evaporator and condenser pump.
Condenser and/or evaporator with epoxy coated fins. Condenser and/or evaporator with copper fins. Top or bottom discharge evaporator fan. By pass air damper.
Units are self-contained and compact for easy installation. Test run before delivery. Frame constructed from Aluminium profile. Insulated Aluminium covers removable for easy access. Textured electrostatic powder coating finish.